B200/B210/B200mini/B205mini

From Ettus Knowledge Base
Revision as of 19:06, 2 May 2016 by Ettus (Talk | contribs) (FPGA)

Jump to: navigation, search

Device Overview

The USRP Bus Series provides a fully integrated, single board, Universal Software Radio Peripheral platform with continuous frequency coverage from 70 MHz – 6 GHz. Designed for low-cost experimentation, it combines a fully integrated direct conversion transceiver providing up to 56MHz of real-time bandwidth, an open and reprogrammable Spartan6 FPGA, and fast and convenient bus-powered SuperSpeed USB 3.0 connectivity.

Key Features

B200

  • Xilinx Spartan 6 XC6SLX75 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
  • Optional Board Mounted GPSDO
Product b200.png

B210

  • Xilinx Spartan 6 XC6SLX150 FPGA
  • Analog Devices AD9361 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth (61.44MS/s quadrature)
  • Full duplex, MIMO (2 Tx & 2 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
  • Optional Board Mounted GPSDO
Product b210.png

B200mini

  • Xilinx Spartan-6 XC6SLX75 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
Product b200 mini.png

B200mini-i

  • Industrial-grade Xilinx Spartan-6 XC6SLX75 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
Product b200 mini i.png

B205mini-i

  • Industrial-grade Xilinx Spartan-6 XC6SLX150 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
Product b200 mini i.png

RF Specifications

The USRP B200/B210/B200mini/B205mini are derived from the Analog devices AD936x integrated transceiver chip, the overall RF performance of the device is largely governed by the transceiver chip itself.

RF Performance

  • SSB/LO Suppression -35/50 dBc
  • Phase Noise 3.5 GHz 1.0 deg RMS
  • Phase Noise 6 GHz 1.5 deg RMS
  • Power Output >10dBm
  • IIP3 (@ typ NF) -20dBm
  • Typical Noise Figure <8dB
  • Maximum Input Power: 0 dBm

Clocks and Samples Rates

  • FIXME NEEL

Physical Specifications

Dimensions

  • B200mini/B205mini 5.0 x 8.4 cm
  • B200/B210 9.7 x 15.5 x 1.5 cm

Environmental Specifications

Operating Temperature Range

  • B200mini 0-40 °C
  • B200mini-i 0-45 °C
  • B205mini-i 0-45 °C
  • B200 0-40 °C
  • B210 0-40 °C

Schematics

B200mini

B200mini Schematics

B210

B210 Schematics

Datasheets

  • Optional GPSDO (B200/B210 only) - M9107

Mechanical Info

Weight

  • B200mini 24.0 g
  • B200/B210 350 g

Drawings

Enclosures

  • Full Steel Enclosure
  • Compatible with green USRP B200 and B210 devices (revision 6 or later)
  • Front and rear K-Slots for anti-theft protection

USRP B Series Enclosure

B200

Device utilization summary:
---------------------------

Selected Device : 6slx75fgg484-3


Slice Logic Utilization:
 Number of Slice Registers:           15781  out of  93296    16%
 Number of Slice LUTs:                19987  out of  46648    42%
    Number used as Logic:             15983  out of  46648    34%
    Number used as Memory:             4004  out of  11072    36%
       Number used as RAM:              972
       Number used as SRL:             3032

Slice Logic Distribution:
 Number of LUT Flip Flop pairs used:  24062
   Number with an unused Flip Flop:    8281  out of  24062    34%
   Number with an unused LUT:          4075  out of  24062    16%
   Number of fully used LUT-FF pairs: 11706  out of  24062    48%
   Number of unique control sets:       434

IO Utilization:
 Number of IOs:                         172
 Number of bonded IOBs:                 155  out of    280    55%
    IOB Flip Flops/Latches:             124

Specific Feature Utilization:
 Number of Block RAM/FIFO:              144  out of    172    83%
    Number using Block RAM only:        144
 Number of BUFG/BUFGCTRLs:                4  out of     16    25%
 Number of DSP48A1s:                     76  out of    132    57%

B210

Device utilization summary:
---------------------------

Selected Device : 6slx150fgg484-3


Slice Logic Utilization:
 Number of Slice Registers:           29310  out of  184304    15%
 Number of Slice LUTs:                36486  out of  92152    39%
    Number used as Logic:             29279  out of  92152    31%
    Number used as Memory:             7207  out of  21680    33%
       Number used as RAM:             1752
       Number used as SRL:             5455

Slice Logic Distribution:
 Number of LUT Flip Flop pairs used:  43635
   Number with an unused Flip Flop:   14325  out of  43635    32%
   Number with an unused LUT:          7149  out of  43635    16%
   Number of fully used LUT-FF pairs: 22161  out of  43635    50%
   Number of unique control sets:       723

IO Utilization:
 Number of IOs:                         180
 Number of bonded IOBs:                 163  out of    338    48%
    IOB Flip Flops/Latches:             148

Specific Feature Utilization:
 Number of Block RAM/FIFO:              186  out of    268    69%
    Number using Block RAM only:        186
 Number of BUFG/BUFGCTRLs:                4  out of     16    25%
 Number of DSP48A1s:                    152  out of    180    84%

B200mini

Device utilization summary:
---------------------------

Selected Device : 6slx75csg484-3


Slice Logic Utilization:
 Number of Slice Registers:           15949  out of  93296    17%
 Number of Slice LUTs:                19963  out of  46648    42%
    Number used as Logic:             16140  out of  46648    34%
    Number used as Memory:             3823  out of  11072    34%
       Number used as RAM:              972
       Number used as SRL:             2851

Slice Logic Distribution:
 Number of LUT Flip Flop pairs used:  23859
   Number with an unused Flip Flop:    7910  out of  23859    33%
   Number with an unused LUT:          3896  out of  23859    16%
   Number of fully used LUT-FF pairs: 12053  out of  23859    50%
   Number of unique control sets:       429

IO Utilization:
 Number of IOs:                         123
 Number of bonded IOBs:                 114  out of    328    34%
    IOB Flip Flops/Latches:             147

Specific Feature Utilization:
 Number of Block RAM/FIFO:              110  out of    172    63%
    Number using Block RAM only:        110
 Number of BUFG/BUFGCTRLs:                6  out of     16    37%
 Number of DSP48A1s:                     76  out of    132    57%
 Number of PLL_ADVs:                      1  out of      6    16%

B205mini

Device utilization summary:
---------------------------

Selected Device : 6slx150csg484-3


Slice Logic Utilization:
 Number of Slice Registers:           15949  out of  184304     8%
 Number of Slice LUTs:                19963  out of  92152    21%
    Number used as Logic:             16140  out of  92152    17%
    Number used as Memory:             3823  out of  21680    17%
       Number used as RAM:              972
       Number used as SRL:             2851

Slice Logic Distribution:
 Number of LUT Flip Flop pairs used:  23859
   Number with an unused Flip Flop:    7910  out of  23859    33%
   Number with an unused LUT:          3896  out of  23859    16%
   Number of fully used LUT-FF pairs: 12053  out of  23859    50%
   Number of unique control sets:       429

IO Utilization:
 Number of IOs:                         123
 Number of bonded IOBs:                 114  out of    338    33%
    IOB Flip Flops/Latches:             147

Specific Feature Utilization:
 Number of Block RAM/FIFO:              110  out of    268    41%
    Number using Block RAM only:        110
 Number of BUFG/BUFGCTRLs:                6  out of     16    37%
 Number of DSP48A1s:                     76  out of    180    42%
 Number of PLL_ADVs:                      1  out of      6    16%

Interfaces and Connectivity

B200/B210/B200mini - USB 3.0

Multiple Device Configuration

  • [ADD]

Certifications

RoHS

As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information

Certificate of Volatility

  • B200/B210

Downloads

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github

Application Notes

FAQ

This is a list of frequently asked questions on the USRP B200/B210/B200mini. If you have questions that are not answered in this document, please contact us - info@ettus.com.

Will the USRP B200/B210 work with USB 2.0?

Yes, both the USRP B200 and USRP B210 will fall back to the USB 2.0 standard if a USB 3.0 port is not available. There are several things to consider. First, the USB 2.0 data rates are slower. Depending on the USB controller, operating system, and other factors, you may achieve a sample rate up to 8 MS/s with USB 2.0. Also, you may not be able to bus-power the USRP B200/B210 in USB 2.0 mode.


What samples rates should I expect with USB 3.0? USB 2.0?

USB 3.0 is a new standard, and there seems to be wide variation in throughput across various USB 3.0 controllers. Ettus Research maintains a list of benchmarks for various operating systems and USB 3.0 controllers.


When can I power the USRP B200/B210/B200mini off the USB bus?

The experience may vary across various controllers. Generally speaking, bus-power is ideal for SISO operation. If you are using both channels of a USRP B210 we recommend an external power supply. We provide a power supply with the USRP B210.

MIMO operation with the USRP B210 is not recommended when using the USRP B210 on bus-power.

You should not attempt to run the device on bus-power if a GPS-disciplined oscillator is installed.


How much power does the USRP consume?

The table below shows power consumption (Watts) of a USRP B210 run with a 6V power supply. Figures on a 5V supply (USB power), or with a USRP B200 will be moderately lower. The sample rates shown are aggregate sample rates on the USB 3.0 interface.

5 Msps 15.36 Msps 30.72 Msps 56 Msps 61.44 Msps
1 RX 1.92 2.112 2.184 2.508
2 RX 2.148 2.436 2.508 2.64
1 TX 2.184 2.34 2.352 2.22
2 TX 2.76 2.88 2.904 2.64
Full Duplex (1x1) 2.508 2.736 2.796 3.168
2x2 MIMO 3.252 3.588 3.672 4.11 4.092


Can I build a multi-unit system with the USRP B200/B210?

It is possible to synchronize multiple USRP B200/B210 devices using the 10 MHz/1 PPS inputs and an external distribution system like to the OctoClock-G. However, USB 3.0/2.0 performance varies dramatically when multiple devices are streaming through the same controller. Generally, we recommend using the USRP N200/N210 if you need to build a high-channel count system.


Can I access the source code for the USRP B200/B210?

Yes. The USRP B200/B210 is supported by the USRP Hardware DriverTM software. You can find the driver and FPGA source code for the USRP B200/B210, and all other USRP models, in the UHD git repository:

http://files.ettus.com/manual/page_build_guide.html


What operating systems does the USRP B200/B210 work on?

The USRP B200/B210 is supported on Linux, MAC and Windows.


Does the USRP B200/B210 work with GNU Radio?

Yes. The USRP B200/B210 work with our GNU Radio plugin - gr-uhd.


Does the USRP B200/B210 work with MATLAB and Simulink?

Yes. You need to install the Communications System Toolbox Support Package for USRP Radio.


Does the USRP B200/B210 work with OpenBTS?

Yes. This is a third-party application and you can find instructions here: OpenBTS - Build, Install, Run.

For support, please sign up and contact the OpenBTS mailing list.


What tools do I need to program the FPGA?

The USRP B200 and USRP B210 include a Spartan 6 XC6SLX75 and XC6S150, respectively. The USRP B200 can be programmed with the free version of Xilinx tools, while the larger FPGA on the USRP B210 requires a licensed seat.


Can I use a GPSDO with the USRP B200/B210?

Ettus Research offers a Board-Mounted GPS-Disciplined OCXO and a Board-Mounted GPS-Disciplined TCXO, which are compatible with the USRP B200/B210. These provide a high-accuracy XO, which can be disciplined to the global GPS standard. Please note: When the GPSDO OCXO model is integrated on the USRP B200/B210, the device should be powered with an external supply instead of USB bus power. The TCXO version can be USB bus powered.