Difference between revisions of "X300/X310"

From Ettus Knowledge Base
Jump to: navigation, search
(FAQ)
(Datasheets)
Line 58: Line 58:
  
 
==Datasheets==
 
==Datasheets==
[http://www.xilinx.com/support/documentation/data_sheets/ds180_7Series_Overview.pdf XC7K410T-2FFG900]
+
* XC7K325T
[http://www.xilinx.com/support/documentation/data_sheets/ds182_Kintex_7_Data_Sheet.pdf XC7K410T-2FFG900]
+
* XC7K410T
 +
* FPGA - [http://www.xilinx.com/support/documentation/data_sheets/ds180_7Series_Overview.pdf XC7K410T-2FFG900]
 +
* FPGA - [http://www.xilinx.com/support/documentation/data_sheets/ds182_Kintex_7_Data_Sheet.pdf XC7K410T-2FFG900]
  
[http://www.analog.com/media/en/technical-documentation/data-sheets/AD7912_7922.pdf AD7922ARMZ]
+
* 12-Bit ADC - [http://www.analog.com/media/en/technical-documentation/data-sheets/AD7912_7922.pdf AD7922ARMZ]
  
[http://www.analog.com/media/en/technical-documentation/data-sheets/AD5623R_43R_63R.pdf AD5623RBRMZ-3]
+
* 12-Bit DAC - [http://www.analog.com/media/en/technical-documentation/data-sheets/AD5623R_43R_63R.pdf AD5623RBRMZ-3]
  
[https://www.fairchildsemi.com/datasheets/FI/FIN1002.pdf FIN1002]
+
* Dual Channel, 16-Bit, 1230 MSPS DAC - [http://www.analog.com/media/en/technical-documentation/data-sheets/AD9146.PDF AD9146]
 +
* Dual Channel, 14-Bit 210 MSPS ADC - [http://www.ti.com/lit/ds/slas635b/slas635b.pdf ADS62P48]
  
[http://ww1.microchip.com/downloads/en/DeviceDoc/20001203U.pdf 24LC256T]
+
* High Speed Differential Receiver - [https://www.fairchildsemi.com/datasheets/FI/FIN1002.pdf FIN1002]
  
ADS62P48IRGC
+
* EEPROM - [http://ww1.microchip.com/downloads/en/DeviceDoc/20001203U.pdf 24LC256T]
  
[http://www.analog.com/media/en/technical-documentation/data-sheets/AD9146.PDF AD9146]
+
* Jitter Cleaner With Dual Loop PLLs - [http://www.ti.com/lit/ds/symlink/lmk04816.pdf LMK04816BISQ/NOPB_1/3]
  
[http://www.ti.com/lit/ds/symlink/lmk04816.pdf LMK04816BISQ/NOPB_1/3]
+
* MULTIPLEXER - [http://www.micrel.com/_PDF/HBW/sy89547l.pdf SY89547LMGTR]
  
[http://www.micrel.com/_PDF/HBW/sy89547l.pdf SY89547LMGTR]
+
* Single Schmitt-Trigger Buffer Gate - [http://www.ti.com/lit/ds/symlink/sn74aup1t17.pdf SN74AUP1T17]
 
+
[http://www.ti.com/lit/ds/symlink/sn74aup1t17.pdf SN74AUP1T17]
+
  
 
SHIELD-748871-01
 
SHIELD-748871-01
Line 83: Line 84:
 
NUP4302
 
NUP4302
  
[http://www.ti.com/lit/ds/symlink/tps54620.pdf TPS54620RGYT]
+
* Synchronous Step Down SWIFT™ Converter - [http://www.ti.com/lit/ds/symlink/tps54620.pdf TPS54620RGYT]
  
[http://cds.linear.com/docs/en/datasheet/1764fb.pdf LT1764EQ-3.3]
+
* Regulator - [http://cds.linear.com/docs/en/datasheet/1764fb.pdf LT1764EQ-3.3]
  
[http://www.ti.com/lit/ds/symlink/tps7a47.pdf TPS7A47]
+
* Voltage Regulator - [http://www.ti.com/lit/ds/symlink/tps7a47.pdf TPS7A47]
  
[http://cds.linear.com/docs/en/datasheet/3603fc.pdf LTC3603EUF_TRPBF]
+
* Monolithic Synchronous Step-Down Regulator - [http://cds.linear.com/docs/en/datasheet/3603fc.pdf LTC3603EUF_TRPBF]
  
[http://www.ti.com/lit/ds/symlink/tps77625.pdf TPS77625_SM]
+
* LOW-DROPOUT VOLTAGE REGULATORS - [http://www.ti.com/lit/ds/symlink/tps77625.pdf TPS77625_SM]
  
 
TPS511116
 
TPS511116
  
[http://www.ti.com/lit/ds/symlink/tps79318-ep.pdf TPS79318_SM]
+
* LOW-DROPOUT LINEAR REGULATORS - [http://www.ti.com/lit/ds/symlink/tps79318-ep.pdf TPS79318_SM]
  
 
HDR2X7-761985-01
 
HDR2X7-761985-01
  
 
FT223HQ
 
FT223HQ
 
* XC7K325T
 
* XC7K410T
 
  
 
==Mechanical Info==
 
==Mechanical Info==

Revision as of 17:34, 13 April 2016

Device Overview

The Ettus Research USRP X310 is a high-performance, scalable software defined radio (SDR) platform for designing and deploying next generation wireless communications systems. The hardware architecture combines two extended-bandwidth daughterboard slots covering DC – 6 GHz with up to 120 MHz of baseband bandwidth, multiple high-speed interface options (PCIe, dual 10 GigE, dual 1 GigE), and a large user-programmable Kintex-7 FPGA in a convenient desktop or rack-mountable half-wide 1U form factor.

Key Features

X300

  • Xilinx Kintex-7 XC7K325T FPGA
  • 14 bit 200 MS/s ADC
  • 16 bit 800 MS/s DAC
  • Frequency range: DC - 6 GHz with suitable daughterboard
  • Up 120MHz bandwidth per channel
  • Two wide-bandwidth RF daughterboard slots
  • Optional GPSDO
  • Multiple high-speed interfaces (Dual 10G, PCIe Express, ExpressCard, Dual 1G

X310

  • Xilinx Kintex-7 XC7K410T FPGA
  • 14 bit 200 MS/s ADC
  • 16 bit 800 MS/s DAC
  • Frequency range: DC - 6 GHz with suitable daughterboard
  • Up 120MHz bandwidth per channel
  • Two wide-bandwidth RF daughterboard slots
  • Optional GPSDO
  • Multiple high-speed interfaces (Dual 10G, PCIe Express, ExpressCard, Dual 1G

Compatible Daughterboards

  • WBX-120 / WBX-40
  • SBX-120 / SBX-40
  • CBX-120 / CBX-40
  • UBX-160 / UBX-40
  • BasicTX / BasicRX
  • LFRX / LFTX

RF Specifications

RF Performance (with SBX-120)

  • SSB/LO Suppression -35/50 dBc
  • Phase Noise 3.5 GHz 1.0 deg RMS
  • Phase Noise 6 GHz 1.5 deg RMS
  • Power Output >10dBm
  • IIP3 (@ typ NF) 0dBm
  • Typical Noise Figure 8dB

Physical Specifications

Dimensions

27.7 x 21.8 x 3.9 cm

Environmental Specifications

Operating Temperature Range

  • X300/X310 0-40 °C

Schematics

X300/X310

X300/X310 Schematics

Datasheets

  • Dual Channel, 16-Bit, 1230 MSPS DAC - AD9146
  • Dual Channel, 14-Bit 210 MSPS ADC - ADS62P48
  • High Speed Differential Receiver - FIN1002

SHIELD-748871-01

NUP4302

TPS511116

HDR2X7-761985-01

FT223HQ

Mechanical Info

Weight

With 2x SBX-120: 1.7kg

Drawings

FPGA

Resource Type X300 - XC7K325T X310 - XC7K410T
Count Total Available Count Total Available
DSP48 Blocks 753 840 90% 1453 1540 94%
Block Rams (18 kB) 5 445 1% 356 795 45%
Logic Cells 125536 203800 62% 182024 254200 72%
Slices LUTS 27413 50950 54% 38801 63550 61%
  • Updated February 18, 2014 for UHD 3.8.5

Interfaces and Connectivity

Follow the links below for additional information on configuring each interface for the USRP X300 or X310 SDRs.

Downloads

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github

Application Notes

FAQ

https://www.ettus.com/kb/detail/usrp-x300x310-faq

USRP™ X300 and USRP™ X310 SDRs Frequently Asked Questions

  • What is the bandwidth of the USRP X300/X310

The ADC rate on each analog RX channel is 200 MS/s quadrature, which provides a theoretical analog bandwidth of approximately 80% of the Nyquist bandwidth of +/- 100 MHz (+/- 80 MHz around the center frequency). The resulting maximum theoretical analog bandwidth is 160 MHz. The actual analog bandwidth may be reduced due the RF daughterboard selected.

RF Daughterboard Bandwidths: See the daughterboard specifications [link]

FPGA Processing Bandwidth: Up to 200 MS/s quadrature.

Host Bandwidth: Up to 200 MS/s quadrature, dependent on selected interface

For more information about achieving the maximum bandwidth with a USRP X300/X310, please see the "USRP X300/X310 Configuration Guide" or the "USRP System Bandwidth" application note.

  • How can I program the USRP X300/X310

Like all other USRP models, the USRP X300 and X310 are compatible with the USRP Hardware Driver™ (UHD) architecture. The UHD architecture is a common driver that allows users to develop and execute applications on a host-PC. UHD provides a direct C++ API to control and stream to/from the USRP X300/X310. It also provides compatibility with a variety of third-party software frameworks including GNU Radio, Labview, and Matlab. You may also customize the FPGA image provided with UHD to integrate your own signal processing. For more information about UHD, and supported software frameworks, please see:

http://files.ettus.com/manual/

  • How do I update the FPGA images and firmware with the latest from UHD

You can find more information about updating the FPGA image through PCIe, 1/10 GigE, and JTAG here.

  • How can I modify the FPGA of the USRP X300/X310

The source code (Verilog) for the USRP X300/X310 is available in the UHD repository. The USRP X300/X310 requires ISE 14.4 or newer. The build process leverages the existing CMAKE build system used to compile the host-side driver. A Linux-based setup will provide the best results.

  • How much free space is available in the USRP X300/X310 FPGA

Please see the USRP X300/X310 FPGA resources page for more information.

  • What type of PC setup is recommended for use with the USRP X300/X310

The type of PC required depends heavily on the complexity and bandwidth of the application. To demonstrate the USRP X300/X310, we typically use a desktop computer with a quadcore i7, 8+ GB of DDR3, and install the PCIe interface card that is also provide with the 10 GigE, PCIe, and ExpressCard interface kits.

  • What frequency range does the USRP X300/X310 cover

The frequency range depends on the daughterboard select by the users. For more information, please see the USRP X300/X310 Configuration Guide.

  • What components do I need to purchase for a complete USRP X300/X310 system

For a more comprehensive guide, please see the USRP X300/X310 Configuration Guide.

  • What is the difference between the USRP X300/X310

The USRP X310 includes a larger Kintex-7 series FPGA (XC7K410T) with additional development resources for more complex designs. The USRP X300 includes the smaller XC7K325T FPGA.