Difference between revisions of "CBX"

From Ettus Knowledge Base
Jump to: navigation, search
(Key Component Datasheets)
(Key Component Datasheets)
Line 39: Line 39:
 
|-
 
|-
 
|[http://www.avagotech.com/docs/AV02-2919EN VMMK-3603]
 
|[http://www.avagotech.com/docs/AV02-2919EN VMMK-3603]
|
+
|Low Noise Amplifier
 
|U1, U5 (1)
 
|U1, U5 (1)
 
|-
 
|-
  
 
|[http://www.skyworksinc.com/uploads/documents/AS225_313LF_200148E.pdf AS225-313LF]
 
|[http://www.skyworksinc.com/uploads/documents/AS225_313LF_200148E.pdf AS225-313LF]
|
+
|SPDT Switch
 
|U3, U6 (1)
 
|U3, U6 (1)
 
|-
 
|-
  
 
|[http://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/HMC624LP4E.pdf HMC624LP4E]
 
|[http://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/HMC624LP4E.pdf HMC624LP4E]
|
+
|ATTENUATOR
 
|U7, U2 (1)
 
|U7, U2 (1)
 
|-
 
|-
  
 
|[http://www.avagotech.com/docs/AV02-1985EN MGA82563]
 
|[http://www.avagotech.com/docs/AV02-1985EN MGA82563]
|
+
|Amplifier
 
|U4 (1)
 
|U4 (1)
 
|-
 
|-
  
 
|[https://www.minicircuits.com/pdfs/GVA-84+.pdf GVA-84+]
 
|[https://www.minicircuits.com/pdfs/GVA-84+.pdf GVA-84+]
|
+
|Amplifier
 
|U9 (1)
 
|U9 (1)
 
|-
 
|-
  
 
|[https://www.minicircuits.com/pdfs/PHA-1+.pdf PHA-1+]
 
|[https://www.minicircuits.com/pdfs/PHA-1+.pdf PHA-1+]
|
+
|Amplifier
 
|U8 (1)
 
|U8 (1)
 
|-
 
|-
  
 
|[http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5380.pdf ADL5380ACPZ]
 
|[http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5380.pdf ADL5380ACPZ]
|
+
|Quadrature Demodulator
 
|U11 (2)
 
|U11 (2)
 
|-
 
|-
  
 
|[http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4927-1_ADA4927-2.pdf ADA4927-2YCPZ]
 
|[http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4927-1_ADA4927-2.pdf ADA4927-2YCPZ]
|
+
|Differential ADC Driver
 
|U10 (2)
 
|U10 (2)
 
|-
 
|-
  
 
|[http://www.analog.com/media/en/technical-documentation/data-sheets/AD8591_8592_8594.pdf AD8591ARTZ-REEL]
 
|[http://www.analog.com/media/en/technical-documentation/data-sheets/AD8591_8592_8594.pdf AD8591ARTZ-REEL]
|
+
|Amplifiers
 
|U31 (2)
 
|U31 (2)
 
|-
 
|-
  
 
|[https://www.fairchildsemi.com/datasheets/NC/NC7WZ04.pdf NC7WZ04P6X]
 
|[https://www.fairchildsemi.com/datasheets/NC/NC7WZ04.pdf NC7WZ04P6X]
|
+
|Dual Inverter
 
|U26 (3); U15, U16 (4); U21 (5); U27 (6)
 
|U26 (3); U15, U16 (4); U21 (5); U27 (6)
 
|-
 
|-
  
 
|[https://datasheets.maximintegrated.com/en/ds/MAX2870.pdf MAX2870ETJ+]
 
|[https://datasheets.maximintegrated.com/en/ds/MAX2870.pdf MAX2870ETJ+]
|
+
|Fractional/Integer-N Synthesizer
 
|U23 (3); U24 (6)
 
|U23 (3); U24 (6)
 
|-
 
|-
  
 
|[http://www.skyworksinc.com/uploads/documents/200027E.pdf SKY13267-321]
 
|[http://www.skyworksinc.com/uploads/documents/200027E.pdf SKY13267-321]
|
+
|Diversity Switch
 
|U12 (3); U25 (6)
 
|U12 (3); U25 (6)
 
|-
 
|-
  
 
|[https://www.minicircuits.com/pdfs/LFCN-2000.pdf LFCN-2000+]
 
|[https://www.minicircuits.com/pdfs/LFCN-2000.pdf LFCN-2000+]
|
+
|Low Pass Filter
 
|FL13 (3); FL12 (6)
 
|FL13 (3); FL12 (6)
 
|-
 
|-
  
 
|[http://www.ti.com/lit/ds/symlink/lp3878-adj.pdf LP3878MR-ADJ]
 
|[http://www.ti.com/lit/ds/symlink/lp3878-adj.pdf LP3878MR-ADJ]
|
+
|Voltage Regulator
 
|U13, U14 (4); U19, U20 (5)
 
|U13, U14 (4); U19, U20 (5)
 
|-
 
|-
  
 
|[http://ww1.microchip.com/downloads/en/DeviceDoc/21210G.pdf 24LC024]
 
|[http://ww1.microchip.com/downloads/en/DeviceDoc/21210G.pdf 24LC024]
|
+
|EEPROM
 
|U17 (4); U22 (5)
 
|U17 (4); U22 (5)
 
|-
 
|-
  
 
|[http://www.analog.com/media/en/technical-documentation/evaluation-documentation/ADL5375.pdf ADL5375-05]
 
|[http://www.analog.com/media/en/technical-documentation/evaluation-documentation/ADL5375.pdf ADL5375-05]
|
+
|Quadrature Modulator
 
|U18 (5)
 
|U18 (5)
 
|-
 
|-

Revision as of 17:48, 14 May 2016

Device Overview

The CBX is a full-duplex, wideband transceiver that covers a frequency band from 1.2 GHz to 6 GHz with a instantaneous bandwidth of 40 MHz or 120 MHz. The CBX can serve a wide variety of application areas, including WiFi research, cellular base stations, cognitive radio research, and RADAR.

The CBX does not provided phase coherent operation, and therefore is not recommended for MIMO and Phased Array applications.

Key Features

  • Frequency Range: 1.2GHz - 6GHz
  • Versions: 40MHz / 120MHz
Product cbx 40.jpg
Product cbx 120.jpg

Hardware Specifications

CBX

  • Details

Environmental Specifications

Operating Temperature Range

  • 0-40 °C

USRP Compatibility

CBX-40

  • N or X Series

CBX-120

  • X Series only

Schematics

CBX

CBX Schematics

Key Component Datasheets

Part Number Description Schematic ID (Page)
VMMK-3603 Low Noise Amplifier U1, U5 (1)
AS225-313LF SPDT Switch U3, U6 (1)
HMC624LP4E ATTENUATOR U7, U2 (1)
MGA82563 Amplifier U4 (1)
GVA-84+ Amplifier U9 (1)
PHA-1+ Amplifier U8 (1)
ADL5380ACPZ Quadrature Demodulator U11 (2)
ADA4927-2YCPZ Differential ADC Driver U10 (2)
AD8591ARTZ-REEL Amplifiers U31 (2)
NC7WZ04P6X Dual Inverter U26 (3); U15, U16 (4); U21 (5); U27 (6)
MAX2870ETJ+ Fractional/Integer-N Synthesizer U23 (3); U24 (6)
SKY13267-321 Diversity Switch U12 (3); U25 (6)
LFCN-2000+ Low Pass Filter FL13 (3); FL12 (6)
LP3878MR-ADJ Voltage Regulator U13, U14 (4); U19, U20 (5)
24LC024 EEPROM U17 (4); U22 (5)
ADL5375-05 Quadrature Modulator U18 (5)

Mechanical Info

  • Add Drawings

RF Connectors

  • The CBX daughterboard features female SMA connectors for both the TX/RX and RX2 connectors.

Certifications

RoHS

As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information

Certificate of Volatility

CBX-40/CBX-120

Performance Data

Downloads

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github