Difference between revisions of "N200/N210"
(→Physical Specifications) |
|||
(36 intermediate revisions by the same user not shown) | |||
Line 4: | Line 4: | ||
== Key Features== | == Key Features== | ||
===N200=== | ===N200=== | ||
+ | {| | ||
+ | |style="vertical-align:top"| | ||
*50 MHz of RF bandwidth with 8 bit samples | *50 MHz of RF bandwidth with 8 bit samples | ||
*25 MHz of RF bandwidth with 16 bit samples | *25 MHz of RF bandwidth with 16 bit samples | ||
Line 17: | Line 19: | ||
*FPGA code can be changed with Xilinx® ISE® WebPACK™ tools | *FPGA code can be changed with Xilinx® ISE® WebPACK™ tools | ||
*Frequency range: DC - 6 GHz with suitable daughterboard | *Frequency range: DC - 6 GHz with suitable daughterboard | ||
+ | |[[File:Product n200.jpg|250px|center]] | ||
+ | |} | ||
===N210=== | ===N210=== | ||
+ | {| | ||
+ | |style="vertical-align:top"| | ||
*50 MHz of RF bandwidth with 8 bit samples | *50 MHz of RF bandwidth with 8 bit samples | ||
*25 MHz of RF bandwidth with 16 bit samples | *25 MHz of RF bandwidth with 16 bit samples | ||
Line 32: | Line 38: | ||
*FPGA code can only be changed with the paid version of the Xilinx® ISE® Design Suite tools | *FPGA code can only be changed with the paid version of the Xilinx® ISE® Design Suite tools | ||
*Frequency range: DC - 6 GHz with suitable daughterboard | *Frequency range: DC - 6 GHz with suitable daughterboard | ||
+ | |[[File:Product n210.jpg|250px|center]] | ||
+ | |} | ||
==Compatible Daughterboards== | ==Compatible Daughterboards== | ||
Line 40: | Line 48: | ||
* LFRX / LFTX | * LFRX / LFTX | ||
* BasicRX / BasicTX | * BasicRX / BasicTX | ||
− | * | + | * DBSRX2 (EOL) |
− | * | + | * RFX Series (EOL) |
+ | * TVRX2 (EOL) | ||
==RF Specifications== | ==RF Specifications== | ||
− | ===RF Performance (with WBX)=== | + | ===RF Performance Data (with WBX)=== |
* SSB/LO Suppression -35/50 dBc | * SSB/LO Suppression -35/50 dBc | ||
* Phase Noise 1.8 GHz 10kHz -80 dBc/Hz | * Phase Noise 1.8 GHz 10kHz -80 dBc/Hz | ||
Line 53: | Line 62: | ||
* Typical Noise Figure 5 dB | * Typical Noise Figure 5 dB | ||
− | == | + | ==Hardware Specifications== |
− | * | + | * Ettus Research recommends to always use the latest stable version of UHD |
+ | |||
+ | ===N200=== | ||
+ | * Current Hardware Revision: 4 | ||
+ | * Minimum version of UHD required: 3.8.0 | ||
+ | |||
+ | ===N210=== | ||
+ | * Current Hardware Revision: 4 | ||
+ | * Minimum version of UHD required: 3.8.0 | ||
==Physical Specifications== | ==Physical Specifications== | ||
Line 60: | Line 77: | ||
===Dimensions=== | ===Dimensions=== | ||
22 x 16 x 5 cm | 22 x 16 x 5 cm | ||
+ | |||
+ | ===Weight=== | ||
+ | 1.2 kg | ||
+ | |||
+ | ===Drawings=== | ||
+ | * [[File:cu usrp-n2x0 motherboard.pdf]] | ||
+ | * [[File:cu ettus-usrp-n2x0.pdf]] | ||
+ | |||
+ | ===CAD/STP Models=== | ||
+ | ====N2xx==== | ||
+ | * [[Media:cu usrp-n2x0 motherboard.stp.gz| Motherboard]] | ||
+ | |||
+ | ====N2xx Enclosure==== | ||
+ | * [[Media:cu ettus-usrp-n2x0.stp.gz|Enclosure]] | ||
==Environmental Specifications== | ==Environmental Specifications== | ||
===Operating Temperature Range=== | ===Operating Temperature Range=== | ||
− | * N200/N210 | + | * N200/N210: 25 °C |
+ | |||
+ | ===Operating Humidity Range=== | ||
+ | * 10% to 90% non-condensing | ||
==Schematics== | ==Schematics== | ||
Line 69: | Line 103: | ||
[http://files.ettus.com/schematics/n200/n2xx.pdf N200/N210 Schematics] | [http://files.ettus.com/schematics/n200/n2xx.pdf N200/N210 Schematics] | ||
− | ==Datasheets== | + | ==Key Component Datasheets== |
− | + | {| class="wikitable" style="width:80%" | |
+ | !Part Number | ||
+ | !Description | ||
+ | !Schematic ID (Page) | ||
+ | |- | ||
+ | |[http://www.analog.com/media/en/technical-documentation/data-sheets/AD9777.pdf AD9777] | ||
+ | |Dual Channel, 16-Bit DAC | ||
+ | |U3 (1) | ||
+ | |- | ||
+ | |[http://www.ti.com/lit/ds/symlink/ads62p45.pdf ADS62P4X] | ||
+ | |Dual Channel, 14-Bit ADC | ||
+ | |U2 (1) | ||
+ | |- | ||
+ | |[http://www.xilinx.com/support/documentation/data_sheets/ds529.pdf XC3SD3400AFG676] | ||
+ | |FPGA | ||
+ | |U1 (2,8,9,10,11,12) | ||
+ | |- | ||
+ | |[http://www.analog.com/media/en/technical-documentation/data-sheets/AD9510.pdf AD9510] | ||
+ | |Clock Distribution IC | ||
+ | |U9 (4) | ||
+ | |- | ||
+ | |[http://download.siliconexpert.com/pdfs/2008/04/26/isys/lsi/ds06-161gphy_et1011c_09-28-2007.pdf ET1011C2] | ||
+ | |Gigabit Ethernet Transceiver | ||
+ | |U12 (6) | ||
+ | |- | ||
+ | |[http://www.cypress.com/file/43236/download CY7C1354C] | ||
+ | |Pipelined SRAM | ||
+ | |U19 (7) | ||
+ | |- | ||
+ | |[http://www.ti.com/lit/ds/symlink/max232.pdf MAX232] | ||
+ | |Drivers/Receiver | ||
+ | |U25 (10) | ||
+ | |- | ||
+ | |} | ||
− | * | + | ==FPGA== |
+ | * Utilization statistics are subject to change between UHD releases. This information is current as of UHD 3.9.4 and was taken directly from Xilinx Vivado 2014.4. | ||
− | + | ===N200=== | |
+ | <pre> | ||
+ | Device utilization summary: | ||
+ | --------------------------- | ||
− | + | Selected Device : 3sd1800afg676-5 | |
− | * | + | Number of Slices: 18356 out of 16640 110% (*) |
+ | Number of Slice Flip Flops: 20466 out of 33280 61% | ||
+ | Number of 4 input LUTs: 32968 out of 33280 99% | ||
+ | Number used as logic: 28511 | ||
+ | Number used as Shift registers: 3945 | ||
+ | Number used as RAMs: 512 | ||
+ | Number of IOs: 338 | ||
+ | Number of bonded IOBs: 331 out of 519 63% | ||
+ | IOB Flip Flops: 342 | ||
+ | Number of BRAMs: 41 out of 84 48% | ||
+ | Number of GCLKs: 6 out of 24 25% | ||
+ | Number of DCMs: 1 out of 8 12% | ||
+ | Number of DSP48s: 31 out of 84 36% | ||
+ | </pre> | ||
− | + | ===N210=== | |
+ | <pre> | ||
+ | Device utilization summary: | ||
+ | --------------------------- | ||
− | + | Selected Device : 3sd3400afg676-5 | |
− | + | Number of Slices: 18349 out of 23872 76% | |
+ | Number of Slice Flip Flops: 20475 out of 47744 42% | ||
+ | Number of 4 input LUTs: 32986 out of 47744 69% | ||
+ | Number used as logic: 28529 | ||
+ | Number used as Shift registers: 3945 | ||
+ | Number used as RAMs: 512 | ||
+ | Number of IOs: 338 | ||
+ | Number of bonded IOBs: 331 out of 469 70% | ||
+ | IOB Flip Flops: 342 | ||
+ | Number of BRAMs: 41 out of 126 32% | ||
+ | Number of GCLKs: 6 out of 24 25% | ||
+ | Number of DCMs: 1 out of 8 12% | ||
+ | Number of DSP48s: 31 out of 126 24% | ||
− | + | </pre> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
==Interfaces and Connectivity== | ==Interfaces and Connectivity== | ||
===N200/N210=== | ===N200/N210=== | ||
* Gigabit Ethernet | * Gigabit Ethernet | ||
− | |||
− | |||
− | |||
==Certifications== | ==Certifications== | ||
===RoHS=== | ===RoHS=== | ||
As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at [http://ettus.com/legal/rohs-information http://ettus.com/legal/rohs-information] | As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at [http://ettus.com/legal/rohs-information http://ettus.com/legal/rohs-information] | ||
+ | |||
+ | ===China RoHS=== | ||
+ | '''Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation''' | ||
+ | |||
+ | '''Chinese Customers''' | ||
+ | |||
+ | National Instruments is in compliance with the Chinese policy on the Restriction of Hazardous Substances (RoHS) used in Electronic Information Products. For more information about the National Instruments China RoHS compliance, visit [http://www.ni.com/environment/rohs_china ni.com/environment/rohs_china]. | ||
==Certificate of Volatility== | ==Certificate of Volatility== | ||
− | * N200/N210 | + | ===N200/N210=== |
+ | * [[Media:volatility USRP N200 N210 r2.pdf]] | ||
+ | |||
+ | ==Recovering the N200/N210== | ||
+ | For a detailed guide to recovering the N200/N210, please see the [[N200/N210 Device Recovery]] application note. | ||
− | ==Downloads | + | ==Downloads== |
[http://files.ettus.com/manual/md_fpga.html FPGA Resources] | [http://files.ettus.com/manual/md_fpga.html FPGA Resources] | ||
Line 133: | Line 218: | ||
− | |||
− | |||
− | |||
− | |||
[[Category:Hardware Resources]] | [[Category:Hardware Resources]] |
Revision as of 14:35, 21 August 2019
Contents
- 1 Device Overview
- 2 Key Features
- 3 Compatible Daughterboards
- 4 RF Specifications
- 5 Hardware Specifications
- 6 Physical Specifications
- 7 Environmental Specifications
- 8 Schematics
- 9 Key Component Datasheets
- 10 FPGA
- 11 Interfaces and Connectivity
- 12 Certifications
- 13 Certificate of Volatility
- 14 Recovering the N200/N210
- 15 Downloads
Device Overview
The USRP Network Series offers high-bandwidth, high-dynamic range processing capability. The Gigabit Ethernet interface of the USRP Network Series allows high-speed streaming capability up to 50 MS/s in both directions (8-bit samples). These features, combined with plug-and-play MIMO capability make the USRP Network an ideal candidate for software defined radio systems with demanding performance requirements.
Key Features
N200
|
N210
|
Compatible Daughterboards
- SBX-40
- UBX-40
- WBX-40
- CBX-40
- LFRX / LFTX
- BasicRX / BasicTX
- DBSRX2 (EOL)
- RFX Series (EOL)
- TVRX2 (EOL)
RF Specifications
RF Performance Data (with WBX)
- SSB/LO Suppression -35/50 dBc
- Phase Noise 1.8 GHz 10kHz -80 dBc/Hz
- Phase Noise 1.8 GHz 100kHz -100 dBc/Hz
- Phase Noise 1.8 GHz 1MHz -137 dBc/Hz
- Power Output 15 dBm
- IIP3 (@ typ NF) 0 dBm
- Typical Noise Figure 5 dB
Hardware Specifications
- Ettus Research recommends to always use the latest stable version of UHD
N200
- Current Hardware Revision: 4
- Minimum version of UHD required: 3.8.0
N210
- Current Hardware Revision: 4
- Minimum version of UHD required: 3.8.0
Physical Specifications
Dimensions
22 x 16 x 5 cm
Weight
1.2 kg
Drawings
CAD/STP Models
N2xx
N2xx Enclosure
Environmental Specifications
Operating Temperature Range
- N200/N210: 25 °C
Operating Humidity Range
- 10% to 90% non-condensing
Schematics
N200/N210
Key Component Datasheets
Part Number | Description | Schematic ID (Page) |
---|---|---|
AD9777 | Dual Channel, 16-Bit DAC | U3 (1) |
ADS62P4X | Dual Channel, 14-Bit ADC | U2 (1) |
XC3SD3400AFG676 | FPGA | U1 (2,8,9,10,11,12) |
AD9510 | Clock Distribution IC | U9 (4) |
ET1011C2 | Gigabit Ethernet Transceiver | U12 (6) |
CY7C1354C | Pipelined SRAM | U19 (7) |
MAX232 | Drivers/Receiver | U25 (10) |
FPGA
- Utilization statistics are subject to change between UHD releases. This information is current as of UHD 3.9.4 and was taken directly from Xilinx Vivado 2014.4.
N200
Device utilization summary: --------------------------- Selected Device : 3sd1800afg676-5 Number of Slices: 18356 out of 16640 110% (*) Number of Slice Flip Flops: 20466 out of 33280 61% Number of 4 input LUTs: 32968 out of 33280 99% Number used as logic: 28511 Number used as Shift registers: 3945 Number used as RAMs: 512 Number of IOs: 338 Number of bonded IOBs: 331 out of 519 63% IOB Flip Flops: 342 Number of BRAMs: 41 out of 84 48% Number of GCLKs: 6 out of 24 25% Number of DCMs: 1 out of 8 12% Number of DSP48s: 31 out of 84 36%
N210
Device utilization summary: --------------------------- Selected Device : 3sd3400afg676-5 Number of Slices: 18349 out of 23872 76% Number of Slice Flip Flops: 20475 out of 47744 42% Number of 4 input LUTs: 32986 out of 47744 69% Number used as logic: 28529 Number used as Shift registers: 3945 Number used as RAMs: 512 Number of IOs: 338 Number of bonded IOBs: 331 out of 469 70% IOB Flip Flops: 342 Number of BRAMs: 41 out of 126 32% Number of GCLKs: 6 out of 24 25% Number of DCMs: 1 out of 8 12% Number of DSP48s: 31 out of 126 24%
Interfaces and Connectivity
N200/N210
- Gigabit Ethernet
Certifications
RoHS
As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information
China RoHS
Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation
Chinese Customers
National Instruments is in compliance with the Chinese policy on the Restriction of Hazardous Substances (RoHS) used in Electronic Information Products. For more information about the National Instruments China RoHS compliance, visit ni.com/environment/rohs_china.
Certificate of Volatility
N200/N210
Recovering the N200/N210
For a detailed guide to recovering the N200/N210, please see the N200/N210 Device Recovery application note.