Difference between revisions of "USRP1"
From Ettus Knowledge Base
(→Key Features) |
(remove unnecessary information) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
==End-of-Life (EOL)== | ==End-of-Life (EOL)== | ||
| − | '''Please note that this product is now End-of-Life (EOL), and is no longer available for sale through Ettus Research, and is not recommended for use in new designs or in new projects.''' | + | |
| + | <span style="color:#FF0000">'''Please note that this product is now End-of-Life (EOL), and is no longer available for sale through Ettus Research, and is not recommended for use in new designs or in new projects.'''</span> | ||
==Key Features== | ==Key Features== | ||
| + | |||
*16 MHz of RF bandwidth with 8 bit samples | *16 MHz of RF bandwidth with 8 bit samples | ||
*8 MHz of RF bandwidth with 16 bit samples (RX Only) | *8 MHz of RF bandwidth with 16 bit samples (RX Only) | ||
| Line 12: | Line 14: | ||
==Proper Care and Handling== | ==Proper Care and Handling== | ||
| + | |||
All Ettus Research products are individually tested before shipment. The USRP1 is guaranteed to be functional at the time it is received by the customer. Improper use or handling of the USRP1 can easily cause the device to become non-functional. Listed below are some examples of actions which can prevent damage to the unit: | All Ettus Research products are individually tested before shipment. The USRP1 is guaranteed to be functional at the time it is received by the customer. Improper use or handling of the USRP1 can easily cause the device to become non-functional. Listed below are some examples of actions which can prevent damage to the unit: | ||
| Line 28: | Line 31: | ||
|- | |- | ||
|} | |} | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[Category:Legacy Products]] | [[Category:Legacy Products]] | ||
Latest revision as of 14:46, 26 June 2026
End-of-Life (EOL)
Please note that this product is now End-of-Life (EOL), and is no longer available for sale through Ettus Research, and is not recommended for use in new designs or in new projects.
Key Features
- 16 MHz of RF bandwidth with 8 bit samples
- 8 MHz of RF bandwidth with 16 bit samples (RX Only)
- USB 2.0 high speed connectivity
- MIMO with a single USRP device the motherboard has two daughterboard slots (2 RX + 2 TX connectors)
- FPGA: Altera Cyclone
- ADCs: 12-bits 64 MS/s
- DACs: 14-bits 128 MS/s
Proper Care and Handling
All Ettus Research products are individually tested before shipment. The USRP1 is guaranteed to be functional at the time it is received by the customer. Improper use or handling of the USRP1 can easily cause the device to become non-functional. Listed below are some examples of actions which can prevent damage to the unit:
- Never allow metal objects to touch the circuit board while powered.
- Always properly terminate the transmit port with an antenna or 50Ω load.
- Always handle the board with proper anti-static methods.
- Never allow the board to directly or indirectly come into contact with any voltage spikes.
- Never allow any water, or condensing moisture, to come into contact with the boards.
- Always use caution with FPGA, firmware, or software modifications.
 |
Never apply more than -15 dBm of power into any RF input. |
|
Always use at least 30dB attenuation if operating in loopback configuration |
