Difference between revisions of "OctoClock CDA-2990"
(→Device Overview) |
(→Signal Levels: more precise spec on REF output) |
||
| (18 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
== Device Overview == | == Device Overview == | ||
| − | |||
| − | '''Note:''' | + | The OctoClock CDA-2990 is an affordable solution for high-accuracy time and frequency reference distribution. The OctoClock accepts 10 MHz and PPS signals from an external source, and distributed each signal 8 ways. The OctoClock is a useful accessory for users that would like to build multi-channel systems that are synchronized to a common timing source. |
| + | |||
| + | The OctoClock-G CDA-2990 provides the same functionality as the OctoClock CDA-2990, but includes a GPSDO that can be used to produce internal 10 MHz and PPS signals, as well as a front-panel switch to select between internal and external sources for the signals. Note that ''both'' signals must come from the same chosen source: either ''both'' are generated internally from the GPSDO, or ''both'' are provided from the external inputs. | ||
| + | |||
| + | '''Note:''' Both of the CDA-2990 devices are functionally identical to the previous generation OctoClock, which contained an Ettus Research logo. | ||
== Key Features== | == Key Features== | ||
| Line 20: | Line 23: | ||
{| | {| | ||
|style="vertical-align:top"| | |style="vertical-align:top"| | ||
| − | ; 10 MHz output : 1.25 Vpp at 50 ohms, 3.3Vpp at 1M ohms | + | ; 10 MHz output : square wave with close to 50% duty cycle; 1.25 Vpp at 50 ohms, 3.3Vpp at 1M ohms |
; 1 PPS output: 20% duty cycle square wave with amplitude 5 V | ; 1 PPS output: 20% duty cycle square wave with amplitude 5 V | ||
| Line 29: | Line 32: | ||
|} | |} | ||
| − | |||
==Physical Specifications== | ==Physical Specifications== | ||
===Dimension (1U Rackmount)=== | ===Dimension (1U Rackmount)=== | ||
4 x 17.187x 1.75 inches | 4 x 17.187x 1.75 inches | ||
| + | |||
| + | ===Weight=== | ||
| + | 2.6 lbs | ||
| + | |||
| + | ===Drawings=== | ||
| + | * [[File:cu ettus octoclock cca.pdf]] | ||
| + | * [[File:cu ettus-octoclock.pdf]] | ||
| + | |||
| + | ===CAD/STP Models=== | ||
| + | ====OctoClock CDA-2990==== | ||
| + | * [[Media:cu ettus octoclock cca.stp.gz| Motherboard]] | ||
| + | |||
| + | ====OctoClock CDA-2990==== | ||
| + | * [[Media:cu ettus octoclock.stp.gz|Enclosure]] | ||
==Environmental Specifications== | ==Environmental Specifications== | ||
| Line 41: | Line 57: | ||
===Operating Humidity Range=== | ===Operating Humidity Range=== | ||
* 10% to 90% non-condensing | * 10% to 90% non-condensing | ||
| + | |||
| + | ==Input/Output Impedance== | ||
| + | All RF Ports are matched to 50 Ohm with -10dB or better return loss generally. Detailed test is pending. | ||
| + | |||
| + | ==Ethernet Port== | ||
| + | The Ethernet port on the OctoClock and OctoClock-G allows the device to be connected to the network. When connected, the <code>uhd_find_devices</code> utility can find any OctoClock devices on the network, and the device's firmware may be updated over Ethernet using the <code>octoclock_burn_eeprom</code> utility. In addition, with the OctoClock-G, NMEA strings may be obtained from the internal GPSDO via the UHD API. Note that there is no host CPU in the OctoClock, so it is not possible to SSH into the device. | ||
==Schematics== | ==Schematics== | ||
| Line 52: | Line 74: | ||
!Schematic ID (Page) | !Schematic ID (Page) | ||
|- | |- | ||
| − | |[ | + | |[https://ww1.microchip.com/downloads/en/DeviceDoc/39662e.pdf ENC28J60−DIG] |
|Ethernet Controller | |Ethernet Controller | ||
|U103 (1) | |U103 (1) | ||
|- | |- | ||
| − | |[ | + | |[https://ww1.microchip.com/downloads/en/DeviceDoc/doc2467.pdf ATmega128] |
|Microcontroller | |Microcontroller | ||
|U102 (1) | |U102 (1) | ||
|- | |- | ||
| − | |[ | + | |[https://www.jackson-labs.com/index.php/products/lc_xo LC_XO] [https://www.jackson-labs.com/assets/uploads/main/LC_XO_specsheet.pdf Spec Sheet] [https://www.jackson-labs.com/assets/uploads/main/LC_XO_Manual.pdf Manual] |
| − | | | + | |Jackson Labs LC_XO (OCXO) |
|U206 (2) | |U206 (2) | ||
|- | |- | ||
| − | |[ | + | |[https://www.ti.com.cn/cn/lit/ds/symlink/sn74aup1t57.pdf SN74AUP1T57] |
|VOLTAGE-LEVEL TRANSLATOR | |VOLTAGE-LEVEL TRANSLATOR | ||
|U204, U203 (2) | |U204, U203 (2) | ||
|- | |- | ||
| − | |[ | + | |[https://www.ti.com/lit/ds/symlink/cdce18005.pdf CDCE18005−PWR] |
|Output Clock Programmable Buffer | |Output Clock Programmable Buffer | ||
|U205 (2) | |U205 (2) | ||
|- | |- | ||
| − | |[ | + | |[https://www.nxp.com/docs/en/data-sheet/74HC_HCT4020_CNV.pdf 74HC4020] |
|Binary Ripple Counter | |Binary Ripple Counter | ||
|U207 (2) | |U207 (2) | ||
|- | |- | ||
| − | |[ | + | |[https://www.ti.com/lit/ds/symlink/lmz12001.pdf LMZ12001] |
|Power Module | |Power Module | ||
|U101 (1) | |U101 (1) | ||
|- | |- | ||
|} | |} | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Certifications== | ==Certifications== | ||
| Line 111: | Line 125: | ||
* [[Media:OctoClock CoV.pdf]] | * [[Media:OctoClock CoV.pdf]] | ||
| − | ==Firmware== | + | == Firmware == |
| − | + | ||
| − | * Full instructions on updating the OctoClock's firmware is located | + | The OctoClock's firmware is divided into two image files: octoclock_bootloader.hex and octoclock_r4_fw.hex. All pre-built image files can be found [http://files.ettus.com/binaries/images/ here], in version-specific ZIP files. Download the version corresponding to the version of UHD that you're running. You must use at least version 3.9.2. |
| − | * Source of the firmware for the OctoClock is located | + | |
| + | * Full instructions on updating the OctoClock's firmware is located [https://files.ettus.com/manual/page_octoclock.html#upgrading_device here] | ||
| + | * Source of the firmware for the OctoClock is located [https://github.com/EttusResearch/uhd/tree/master/firmware/octoclock here] | ||
==Downloads== | ==Downloads== | ||
| − | [https://www.ettus.com/content/ | + | [https://www.ettus.com/wp-content/uploads/2019/01/Octoclock_Spec_Sheet.pdf OctoClock Spec Sheet] |
[http://files.ettus.com/manual/md_fpga.html FPGA Resources] | [http://files.ettus.com/manual/md_fpga.html FPGA Resources] | ||
| Line 128: | Line 143: | ||
| − | ==FAQ== | + | == FAQ == |
| − | *'''What | + | |
| + | * '''What are the OctoClock and OctoClock-G?''' | ||
The OctoClock is a USRP-compatible accessory that allows you to easily synchronize up to 8 USRP radios. Multiple OctoClock devices can be combined for synchronization of larger numbers of USRP radios. | The OctoClock is a USRP-compatible accessory that allows you to easily synchronize up to 8 USRP radios. Multiple OctoClock devices can be combined for synchronization of larger numbers of USRP radios. | ||
| − | + | The OctoClock-G is an OctoClock with added GPSDO module. | |
| − | + | In this FAQ we will use "OctoClock" to refer to either unless there is a specific need to use either name. | |
| − | |||
| − | * | + | * '''When would I used the OctoClock?''' |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | The OctoClock is useful for synchronizing multiple USRP devices for high channel count systems. | |
| − | + | The following applications can benefit from OctoClock clock distribution: | |
| − | + | * Direction Finding | |
| + | * Beamforming | ||
| + | * Adaptive Beamforming | ||
| + | * Multiple-In-Multiple-Out (MIMO) Prototyping | ||
| + | * Geolocation Systems that Use Time-Difference-of-Arrival (TDOA) | ||
| + | * Multi-Channel, Multi-Static, and Passive RADAR | ||
| + | * Multi-Band GPS Record and Playback | ||
| + | * Multi-Band Cellular Monitoring | ||
| − | + | Essentially, anything that requires synchronization or the distribution of timing information would benefit from the use of the OctoClock. | |
| − | |||
| − | *'''How does the OctoClock work''' | + | * '''How does the OctoClock work?''' |
The OctoClock accepts 10 MHz and PPS signals from an external source. Active circuits are used to amplify and split the signals 8-ways. Matched-length traces minimize phase differences between all 10 MHz and 1 PPS outputs | The OctoClock accepts 10 MHz and PPS signals from an external source. Active circuits are used to amplify and split the signals 8-ways. Matched-length traces minimize phase differences between all 10 MHz and 1 PPS outputs | ||
| Line 164: | Line 178: | ||
The OctoClock-G includes an internal GPSDO (GPS Disciplined Oscillator) which provides an internal source for 10 MHz and PPS from an OCXO high precision oscillator. Add a GPS antenna (optional) with a clear view of the sky for GPS Disciplining of the OCXO that futher enhances frequency accuracy of the OCXO and global time synchronization. | The OctoClock-G includes an internal GPSDO (GPS Disciplined Oscillator) which provides an internal source for 10 MHz and PPS from an OCXO high precision oscillator. Add a GPS antenna (optional) with a clear view of the sky for GPS Disciplining of the OCXO that futher enhances frequency accuracy of the OCXO and global time synchronization. | ||
| − | |||
| − | + | * '''Does the OctoClock-G provide power for using an active GPS antenna?''' | |
| − | + | Yes. The OctoClock-G's GPSDO module is the [https://www.jackson-labs.com/index.php/products/lc_xoJackson Labs LC_XO], which can provide 5 V at up to 50 mA to the external active GPS antenna. The non-G OctoClock does not have this GPSDO module, and thus cannot use a GPS antenna if attached, nor provide power to one if attached. | |
| − | |||
| − | The USRP N200 | + | * '''Where can I find user manuals for the OctoClock and USRP?''' |
| + | |||
| + | [https://kb.ettus.com/Synchronization_and_MIMO_Capability_with_USRP_Devices Synchronization and MIMO Capability with USRP Devices] | ||
| + | |||
| + | [https://files.ettus.com/manual/page_multiple.html UHD Manual: Multiple USRP configurations] | ||
| + | |||
| + | |||
| + | * '''What USRP model is recommended for MIMO systems?''' | ||
| + | |||
| + | The USRP N200 + N210, N310, N320 + N321, X300 / X310 are recommended for building high channel count and MIMO systems. These models provide external PPS and 10 MHz reference inputs. The USRP N200 and N210 support the USRP MIMO cable. | ||
The USRP B100, B200, B210, E100, E110, and E310 can be synchronized with 10 MHz/PPS but are not phase coherent MIMO capable devices. The USRP1 cannot be synchronized with 10 MHz/PPS. | The USRP B100, B200, B210, E100, E110, and E310 can be synchronized with 10 MHz/PPS but are not phase coherent MIMO capable devices. The USRP1 cannot be synchronized with 10 MHz/PPS. | ||
| − | |||
| − | When using the OctoClock-G, the Internal/External switch on the front panel allows the user to choose between the internal GPSDO and external source 10 MHz/PPS source. If the selected | + | * '''How does the automatic switchover functionality work?''' |
| + | |||
| + | When using the OctoClock-G, the Internal/External switch on the front panel allows the user to choose between the internal GPSDO and external source 10 MHz/PPS source. If the selected source is unavailable, the device will automatically switch over to the backup frequency source. When switchover is active the corresponding LED indicator will illuminate. | ||
If neither source is present, the internal, external and status LEDs will not be illuminated and the user will not received valid 10 MHz/PPS outputs. | If neither source is present, the internal, external and status LEDs will not be illuminated and the user will not received valid 10 MHz/PPS outputs. | ||
| − | |||
| − | The following list describes the behavior when each of the 6 | + | * '''What do the LEDs status indicators mean?''' |
| + | |||
| + | The following list describes the behavior when each of the 6 LED status indicators is illuminated: | ||
| + | |||
| + | * Internal - internal GPSDO is selected and present. | ||
| + | * External - external source is selected and present | ||
| + | * Status - Either the internal GPSDO or external source is selected. If neither source is present this LED will turn off (no signals are output). | ||
| + | * PPS - selected PPS pulse high. | ||
| + | * GPS Locked - GPS is receiving signals and has valid time/position lock. | ||
| + | * Power - Power is applied. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | *'''What are the input and output specifications''' | + | * '''What are the input and output specifications?''' |
| − | *10 MHz Input – 0-10 dBm | + | * 10 MHz Input – 0-10 dBm |
| − | *10 MHz Outputs - ~1.4 Vpp Square Wave, Impedance 50 ohm nominal | + | * 10 MHz Outputs - ~1.4 Vpp Square Wave, Impedance 50 ohm nominal |
| − | *1 PPS Input - Logic-level pulse, 2. | + | * 1 PPS Input - Logic-level pulse, 2.5 V - 5 V |
| − | *1 PPS Outputs - Logic-level pulse, 2. | + | * 1 PPS Outputs - Logic-level pulse, 2.5 V - 5 V |
| − | |||
| − | + | * '''What is the input voltage rating?''' | |
| − | + | The OctoClock can be powered at any voltage between 6 and 15 Vdc. | |
| − | |||
| − | *'''Are the design files open source''' | + | * '''Are the design files open source?''' |
| − | As with all of our products, the driver code is free & open source, and can be found in our UHD repository. The schematics are also available. | + | As with all of our products, the driver code is free & open source, and can be found in [https://github.com/EttusResearch/uhd/tree/master/firmware/octoclock our UHD repository]. The [https://kb.ettus.com/OctoClock_CDA-2990#OctoClock schematics are also available]. |
[[Category:Hardware Resources]] | [[Category:Hardware Resources]] | ||
Latest revision as of 09:14, 3 September 2024
Contents
Device Overview
The OctoClock CDA-2990 is an affordable solution for high-accuracy time and frequency reference distribution. The OctoClock accepts 10 MHz and PPS signals from an external source, and distributed each signal 8 ways. The OctoClock is a useful accessory for users that would like to build multi-channel systems that are synchronized to a common timing source.
The OctoClock-G CDA-2990 provides the same functionality as the OctoClock CDA-2990, but includes a GPSDO that can be used to produce internal 10 MHz and PPS signals, as well as a front-panel switch to select between internal and external sources for the signals. Note that both signals must come from the same chosen source: either both are generated internally from the GPSDO, or both are provided from the external inputs.
Note: Both of the CDA-2990 devices are functionally identical to the previous generation OctoClock, which contained an Ettus Research logo.
Key Features
|
 |
 |
Signal Levels
|
 |
 |
Physical Specifications
Dimension (1U Rackmount)
4 x 17.187x 1.75 inches
Weight
2.6 lbs
Drawings
CAD/STP Models
OctoClock CDA-2990
OctoClock CDA-2990
Environmental Specifications
Operating Temperature Range
- 0-40 °C
Operating Humidity Range
- 10% to 90% non-condensing
Input/Output Impedance
All RF Ports are matched to 50 Ohm with -10dB or better return loss generally. Detailed test is pending.
Ethernet Port
The Ethernet port on the OctoClock and OctoClock-G allows the device to be connected to the network. When connected, the uhd_find_devices utility can find any OctoClock devices on the network, and the device's firmware may be updated over Ethernet using the octoclock_burn_eeprom utility. In addition, with the OctoClock-G, NMEA strings may be obtained from the internal GPSDO via the UHD API. Note that there is no host CPU in the OctoClock, so it is not possible to SSH into the device.
Schematics
OctoClock
Key Component Datasheets
| Part Number | Description | Schematic ID (Page) |
|---|---|---|
| ENC28J60−DIG | Ethernet Controller | U103 (1) |
| ATmega128 | Microcontroller | U102 (1) |
| LC_XO Spec Sheet Manual | Jackson Labs LC_XO (OCXO) | U206 (2) |
| SN74AUP1T57 | VOLTAGE-LEVEL TRANSLATOR | U204, U203 (2) |
| CDCE18005−PWR | Output Clock Programmable Buffer | U205 (2) |
| 74HC4020 | Binary Ripple Counter | U207 (2) |
| LMZ12001 | Power Module | U101 (1) |
Certifications
RoHS
As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information
China RoHS
Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation
Chinese Customers
National Instruments is in compliance with the Chinese policy on the Restriction of Hazardous Substances (RoHS) used in Electronic Information Products. For more information about the National Instruments China RoHS compliance, visit ni.com/environment/rohs_china.
Certificate of Volatility
OctoClock
Firmware
The OctoClock's firmware is divided into two image files: octoclock_bootloader.hex and octoclock_r4_fw.hex. All pre-built image files can be found here, in version-specific ZIP files. Download the version corresponding to the version of UHD that you're running. You must use at least version 3.9.2.
- Full instructions on updating the OctoClock's firmware is located here
- Source of the firmware for the OctoClock is located here
Downloads
FAQ
- What are the OctoClock and OctoClock-G?
The OctoClock is a USRP-compatible accessory that allows you to easily synchronize up to 8 USRP radios. Multiple OctoClock devices can be combined for synchronization of larger numbers of USRP radios.
The OctoClock-G is an OctoClock with added GPSDO module.
In this FAQ we will use "OctoClock" to refer to either unless there is a specific need to use either name.
- When would I used the OctoClock?
The OctoClock is useful for synchronizing multiple USRP devices for high channel count systems.
The following applications can benefit from OctoClock clock distribution:
- Direction Finding
- Beamforming
- Adaptive Beamforming
- Multiple-In-Multiple-Out (MIMO) Prototyping
- Geolocation Systems that Use Time-Difference-of-Arrival (TDOA)
- Multi-Channel, Multi-Static, and Passive RADAR
- Multi-Band GPS Record and Playback
- Multi-Band Cellular Monitoring
Essentially, anything that requires synchronization or the distribution of timing information would benefit from the use of the OctoClock.
- How does the OctoClock work?
The OctoClock accepts 10 MHz and PPS signals from an external source. Active circuits are used to amplify and split the signals 8-ways. Matched-length traces minimize phase differences between all 10 MHz and 1 PPS outputs
The OctoClock-G includes an internal GPSDO (GPS Disciplined Oscillator) which provides an internal source for 10 MHz and PPS from an OCXO high precision oscillator. Add a GPS antenna (optional) with a clear view of the sky for GPS Disciplining of the OCXO that futher enhances frequency accuracy of the OCXO and global time synchronization.
- Does the OctoClock-G provide power for using an active GPS antenna?
Yes. The OctoClock-G's GPSDO module is the Labs LC_XO, which can provide 5 V at up to 50 mA to the external active GPS antenna. The non-G OctoClock does not have this GPSDO module, and thus cannot use a GPS antenna if attached, nor provide power to one if attached.
- Where can I find user manuals for the OctoClock and USRP?
Synchronization and MIMO Capability with USRP Devices
UHD Manual: Multiple USRP configurations
- What USRP model is recommended for MIMO systems?
The USRP N200 + N210, N310, N320 + N321, X300 / X310 are recommended for building high channel count and MIMO systems. These models provide external PPS and 10 MHz reference inputs. The USRP N200 and N210 support the USRP MIMO cable.
The USRP B100, B200, B210, E100, E110, and E310 can be synchronized with 10 MHz/PPS but are not phase coherent MIMO capable devices. The USRP1 cannot be synchronized with 10 MHz/PPS.
- How does the automatic switchover functionality work?
When using the OctoClock-G, the Internal/External switch on the front panel allows the user to choose between the internal GPSDO and external source 10 MHz/PPS source. If the selected source is unavailable, the device will automatically switch over to the backup frequency source. When switchover is active the corresponding LED indicator will illuminate.
If neither source is present, the internal, external and status LEDs will not be illuminated and the user will not received valid 10 MHz/PPS outputs.
- What do the LEDs status indicators mean?
The following list describes the behavior when each of the 6 LED status indicators is illuminated:
- Internal - internal GPSDO is selected and present.
- External - external source is selected and present
- Status - Either the internal GPSDO or external source is selected. If neither source is present this LED will turn off (no signals are output).
- PPS - selected PPS pulse high.
- GPS Locked - GPS is receiving signals and has valid time/position lock.
- Power - Power is applied.
- What are the input and output specifications?
- 10 MHz Input – 0-10 dBm
- 10 MHz Outputs - ~1.4 Vpp Square Wave, Impedance 50 ohm nominal
- 1 PPS Input - Logic-level pulse, 2.5 V - 5 V
- 1 PPS Outputs - Logic-level pulse, 2.5 V - 5 V
- What is the input voltage rating?
The OctoClock can be powered at any voltage between 6 and 15 Vdc.
- Are the design files open source?
As with all of our products, the driver code is free & open source, and can be found in our UHD repository. The schematics are also available.
