Difference between revisions of "WBX"

Revision as of 22:54, 15 May 2016 (view source) Ettus (Talk | contribs) (→‎Key Component Datasheets) ← Older edit		Revision as of 11:49, 17 May 2016 (view source) Ettus (Talk | contribs) (→‎Hardware Specifications) Newer edit →
Line 15:		Line 15:
	|}		|}
	==Hardware Specifications==		==Hardware Specifications==
		+	* Ettus Research recommends to always use the latest stable version of UHD
		+
	===WBX-40===		===WBX-40===
	* Current Hardware Revision: 1		* Current Hardware Revision: 1

---

Revision as of 11:49, 17 May 2016

Device Overview

The WBX is a wide bandwidth transceiver that provides up to 100 mW of output power and a noise figure of 5 dB. The LO's for the receive and transmit chains operate independently.

The WBX does not provided phase coherent operation, and therefore is not recommended for MIMO and Phased Array applications.

Key Features

Frequency Range: 50MHz - 2.2GHz Versions: 40MHz / 120MHz Power Output: 100mW Noise Figure: 5dB

Hardware Specifications

• Ettus Research recommends to always use the latest stable version of UHD

WBX-40

• Current Hardware Revision: 1
• Minimum version of UHD required: 3.8.0

WBX-120

• Current Hardware Revision: 1
• Minimum version of UHD required: 3.8.0

Environmental Specifications

Operating Temperature Range

• 0-40 °C

USRP Compatibility

WBX-40

• N or X Series

WBX-120

• X Series only

Schematics

WBX

WBX Schematics

WBX FE Schematics

Key Component Datasheets

Part Number	Description	Schematic ID (Page)
ADA4937	Ultralow Distortion Differential ADC Driver	U304 (2)
ADP3336	High Accuracy Ultralow IQ, 500 mA anyCAP® Adjustable Low Dropout Regulator	U306, U308 (2); U503, U505 (4)
ADL5387	50 MHz to 2 GHz Quadrature Demodulator	U307 (2)
ADL5385	50 MHz to 2200 MHz Quadrature Modulator	U501 (4,5)
ADF4350 / ADF4351	Wideband Synthesizer with Integrated VCO	U201 (3); U401 (5)
HMC472LP4	Attenuator	U302 (2); U504 (4,5)
MGA82563	Amplifier	U313 (2)
24LC024	EEPROM	U202 (3); U403 (5)
GVA−84+	Amplifier	U502 (4)

RF Connectors

• The WBX daughterboard features female MCX connectors for both the TX/RX and RX2 connectors.

Certifications

RoHS

As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information

Certificate of Volatility

WBX-40/WBX-120

• Media:volatility UBX CBX WBX SBX r1 1.pdf

Performance Data

• WBX without UHD Corrections

Downloads

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github