Difference between revisions of "BasicTX/BasicRX"
From Ettus Knowledge Base
(→Mechanical Info) |
(→Hardware Specifications) |
||
| Line 13: | Line 13: | ||
==Hardware Specifications== | ==Hardware Specifications== | ||
===BasicRX=== | ===BasicRX=== | ||
| − | * | + | * Current Hardware Revision: 1 |
| + | * Minimum version of UHD required: 3.8.0 | ||
===BasicTX=== | ===BasicTX=== | ||
| − | * | + | * Current Hardware Revision: 1 |
| + | * Minimum version of UHD required: 3.8.0 | ||
==Environmental Specifications== | ==Environmental Specifications== | ||
Revision as of 17:31, 15 May 2016
Contents
Device Overview
The BasicRx/BasicTx daughterboards are low-cost daughterboards that provides direct access to the ADC inputs. The boards can accept real-mode signals from 1 to 250 MHz. The BasicRx/BasicTx is ideal for applications using an external front end providing relatively clean signals within operable bandwidth. Wideband transformers couple each RF input to a single channel of the USRP device's ADC. The signals sampled by the ADC are manipulated in the FPGA, and can be processed as two real-mode signals, or a single I-Q pair.
Key Features
|
 |
 |
Hardware Specifications
BasicRX
- Current Hardware Revision: 1
- Minimum version of UHD required: 3.8.0
BasicTX
- Current Hardware Revision: 1
- Minimum version of UHD required: 3.8.0
Environmental Specifications
Operating Temperature Range
- 0-40 °C
USRP Compatibility
BasicRX
- N or X Series
BasicTX
- N or X Series
Schematics
Basic RX
Basic TX
Key Component Datasheets
| Part Number | Description | Schematic ID | Schematic Page |
|---|---|---|---|
RF Connectors
- The BasicTX/RX daughterboard features female SMA connectors for both the RX and TX connectors.
Certifications
RoHS
As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information
