N200/N210

Device Overview

The USRP Network Series offers high-bandwidth, high-dynamic range processing capability. The Gigabit Ethernet interface of the USRP Network Series allows high-speed streaming capability up to 50 MS/s in both directions (8-bit samples). These features, combined with plug-and-play MIMO capability make the USRP Network an ideal candidate for software defined radio systems with demanding performance requirements.

Key Features

N200

50 MHz of RF bandwidth with 8 bit samples 25 MHz of RF bandwidth with 16 bit samples Gigabit Ethernet connectivity MIMO capable - requires two or more USRP N200 devices as motherboard has one daughterboard slot (1 RX + 1 TX connectors) Onboard FPGA processing FPGA: Xilinx® Spartan® 3A-DSP XC3SD1800A ADCs: 14-bits 100 MS/s DACs: 16-bits 400 MS/s Ability to lock to external 5 or 10 MHz clock reference TCXO Frequency Reference (~2.5ppm) Optional internal GPS locked reference oscillator FPGA code can be changed with Xilinx® ISE® WebPACK™ tools Frequency range: DC - 6 GHz with suitable daughterboard

N210

50 MHz of RF bandwidth with 8 bit samples 25 MHz of RF bandwidth with 16 bit samples Gigabit Ethernet connectivity MIMO capable - requires two or more USRP N210 devices as motherboard has one daughterboard slot (1 RX + 1 TX connectors) Onboard FPGA processing FPGA: Xilinx® Spartan® 3A-DSP XC3SD3400A ADCs: 14-bits 100 MS/s DACs: 16-bits 400 MS/s Ability to lock to external 5 or 10 MHz clock reference TCXO Frequency Reference (~2.5ppm) Optional internal GPS locked reference oscillator FPGA code can only be changed with the paid version of the Xilinx® ISE® Design Suite tools Frequency range: DC - 6 GHz with suitable daughterboard

Compatible Daughterboards

• SBX-40
• UBX-40
• WBX-40
• CBX-40
• LFRX / LFTX
• BasicRX / BasicTX
• TVRX2
• DBSRX2

RF Specifications

RF Performance (with WBX)

• SSB/LO Suppression -35/50 dBc
• Phase Noise 1.8 GHz 10kHz -80 dBc/Hz
• Phase Noise 1.8 GHz 100kHz -100 dBc/Hz
• Phase Noise 1.8 GHz 1MHz -137 dBc/Hz
• Power Output 15 dBm
• IIP3 (@ typ NF) 0 dBm
• Typical Noise Figure 5 dB

Hardware Specifications

N200

• Details

N210

• Details

Clocks and Samples Rates

• FIXME NEEL

Physical Specifications

Dimensions

22 x 16 x 5 cm

Environmental Specifications

Operating Temperature Range

• N200/N210 0-40 °C

Schematics

N200/N210

N200/N210 Schematics

Key Component Datasheets

Part Number	Description	Schematic ID (Page)
AD9777	Dual Channel, 16-Bit DAC	U3 (1)
ADS62P4X	Dual Channel, 14-Bit ADC	U2 (1)
XC3SD3400AFG676	FPGA	U1 (2,8,9,10,11,12)
AD56x3		U4, U5 (3)
AD9510	Clock Distribution IC	U9 (4)
ET1011C2	Gigabit Ethernet Transceiver	U12 (6)
CY7C1354C	Pipelined SRAM	U19 (7)
MAX232	Drivers/Receiver	U25 (10)

Mechanical Info

Weight

1.2 kg

FPGA

• Utilization statistics are subject to change between UHD releases, current as of UHD 3.9.4

N200

Device utilization summary:
---------------------------

Selected Device : 3sd1800afg676-5

 Number of Slices:                    18356  out of  16640   110% (*)
 Number of Slice Flip Flops:          20466  out of  33280    61%
 Number of 4 input LUTs:              32968  out of  33280    99%
    Number used as logic:             28511
    Number used as Shift registers:    3945
    Number used as RAMs:                512
 Number of IOs:                         338
 Number of bonded IOBs:                 331  out of    519    63%
    IOB Flip Flops:                     342
 Number of BRAMs:                        41  out of     84    48%
 Number of GCLKs:                         6  out of     24    25%
 Number of DCMs:                          1  out of      8    12%
 Number of DSP48s:                       31  out of     84    36%

N210

Device utilization summary:
---------------------------

Selected Device : 3sd3400afg676-5

 Number of Slices:                    18349  out of  23872    76%
 Number of Slice Flip Flops:          20475  out of  47744    42%
 Number of 4 input LUTs:              32986  out of  47744    69%
    Number used as logic:             28529
    Number used as Shift registers:    3945
    Number used as RAMs:                512
 Number of IOs:                         338
 Number of bonded IOBs:                 331  out of    469    70%
    IOB Flip Flops:                     342
 Number of BRAMs:                        41  out of    126    32%
 Number of GCLKs:                         6  out of     24    25%
 Number of DCMs:                          1  out of      8    12%
 Number of DSP48s:                       31  out of    126    24%

Interfaces and Connectivity

N200/N210

• Gigabit Ethernet

Multiple Device Configuration

• [ADD]

Certifications

RoHS

As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information

Certificate of Volatility

N200/N210

• Media:volatility USRP N200 N210 r2.pdf

Downloads (FPGA images, E310 images, etc.)

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github

Application Notes

• USRP N Series Quick Start (Daughterboard Installation)