B200/B210/B200mini/B205mini

From Ettus Knowledge Base
Revision as of 13:13, 6 April 2016 by Ettus (Talk | contribs) (Environmental Specifications)

Jump to: navigation, search

Device Overview

The USRP Bus Series provides a fully integrated, single board, Universal Software Radio Peripheral platform with continuous frequency coverage from 70 MHz – 6 GHz. Designed for low-cost experimentation, it combines a fully integrated direct conversion transceiver providing up to 56MHz of real-time bandwidth, an open and reprogrammable Spartan6 FPGA, and fast and convenient bus-powered SuperSpeed USB 3.0 connectivity.

Key Features

USRP B200

  • Xilinx Spartan 6 XC6SLX75 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
  • Optional Board Mounted GPSDO (TCXO)

USRP B210

  • Xilinx Spartan 6 XC6SLX150 FPGA
  • Analog Devices AD9361 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth (61.44MS/s quadrature)
  • Full duplex, MIMO (2 Tx & 2 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity
  • Optional Board Mounted GPSDO (TCXO)

USRP B200mini

  • Xilinx Spartan-6 XC6SLX75 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity

USRP B200mini-i

  • Industrial-grade Xilinx Spartan-6 XC6SLX75 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity

USRP B205mini-i

  • Industrial-grade Xilinx Spartan-6 XC6SLX150 FPGA
  • Analog Devices AD9364 RFIC direct-conversion transceiver
  • Frequency range: 70 MHz - 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • Full duplex, SISO (1 Tx & 1 Rx)
  • Fast and convenient bus-powered USB 3.0 connectivity

RF Specifications

RF Performance

  • SSB/LO Suppression -35/50 dBc
  • Phase Noise 3.5 GHz 1.0 deg RMS
  • Phase Noise 6 GHz 1.5 deg RMS
  • Power Output >10dBm
  • IIP3 (@ typ NF) -20dBm
  • Typical Noise Figure <8dB

Digital Specifications

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Quod voluptates molestias excepturi nisi ea minus hic iste velit optio doloremque similique ab nulla, beatae obcaecati! Nobis, at dolorum id nostrum? Lorem ipsum dolor sit amet, consectetur adipisicing elit. Quod voluptates molestias excepturi nisi ea minus hic iste velit optio doloremque similique ab nulla, beatae obcaecati! Nobis, at dolorum id nostrum? Lorem ipsum dolor sit amet, consectetur adipisicing elit. Quod voluptates molestias excepturi nisi ea minus hic iste velit optio doloremque similique ab nulla, beatae obcaecati! Nobis, at dolorum id nostrum?

Physical Specifications

Dimensions

  • B200mini 5.0 x 8.4 cm
  • B200/B210 9.7 x 15.5 x 1.5 cm

Environmental Specifications

Operating Temperature Range

  • B200mini 0-40 °C
  • B200mini-i 0-45 °C
  • B205mini-i 0-45 °C
  • B200 0-40 °C
  • B210 0-40 °C

Schematics

B200mini

B200mini Schematics

B210

B210 Schematics

Key Components

AD9364

Analog Devices AD9364

AD9361

Analog Devices AD9361

Spartan-6

Xilinx Spartan-6 Product Page

B200mini VXTCXO

M9107 GPSDO

ADF4001 Frequency Synthesizer

XC6SLX75 / XC6SLX150

CYUSB3014

SKY13317

BD3150L50100A00

PGA−102+

Datasheets

B200mini-i/B200mini

B200/B210

Mechanical Info

Weight

  • B200mini 24.0 g
  • B200/B210 350 g

Drawings

Enclosures (B-series only)

  • Full Steel Enclosure
  • Compatible with green USRP B200 and B210 devices (revision 6 or later)
  • Front and rear K-Slots for anti-theft protection

USRP B Series Enclosure

FPGA

B200

Slice Logic Utilization
Used Total Percent
Number of Slice Registers 12007 93296 12%
Number of Slice LUTs 17149 46648 36%
Number used as Logic 14889 46648 31%
Number used as Memory 2260 11072 20%
Number used as RAM 336
Number used as SRL 1924
Slice Logic Distribution
Used Total Percent
Number with an unused Flip Flop 8325 20332 40%
Number with an unused LUT 3183 20332 15%
Number of fully used LUT-FF pairs 8824 20332 43%
Number of LUT Flip Flop pairs used 20332
Number of unique control sets 301
IO Utilization
Used Total Percent
Number of bonded IOBs 156 280 55%
IOB Flip Flops/Latches 138
Number of IOs 172
Specific Feature Utilization
Used Total Percent
Number of Block RAM/FIFO 144 172 83%
Number of BUFG/BUFGCTRLs 5 16 31%
Number of DSP48A1s 16 132 12%
Number using Block RAM only 144

B210

Slice Logic Utilization
Used Total Percent
Number of Slice Registers 21608 184304 11%
Number of Slice LUTs 30782 92152 33%
Number used as Logic 27069 92152 29%
Number used as Memory 3713 21680 17%
Number used as RAM 480
Number used as SRL 3233
Slice Logic Distribution
Used Total Percent
Number with an unused Flip Flop 15225 36833 41%
Number with an unused LUT 6051 36833 16%
Number of fully used LUT-FF pairs 15557 36833 42%
Number of LUT Flip Flop pairs used 36833
Number of unique control sets 461
IO Utilization
Used Total Percent
Number of bonded IOBs 156 338 46%
IOB Flip Flops/Latches 154
Number of IOs 172
Specific Feature Utilization
Used Total Percent
Number of Block RAM/FIFO 186 268 69%
Number of BUFG/BUFGCTRLs 5 16 31%
Number of DSP48A1s 32 180 17%
Number using Block RAM only 186

Interfaces and Connectivity

B200/B210/B200mini - USB 3.0

Downloads

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github