N200/N210

From Ettus Knowledge Base
Revision as of 22:57, 15 May 2016 by Ettus (Talk | contribs) (Mechanical Info)

Jump to: navigation, search

Device Overview

The USRP Network Series offers high-bandwidth, high-dynamic range processing capability. The Gigabit Ethernet interface of the USRP Network Series allows high-speed streaming capability up to 50 MS/s in both directions (8-bit samples). These features, combined with plug-and-play MIMO capability make the USRP Network an ideal candidate for software defined radio systems with demanding performance requirements.

Key Features

N200

  • 50 MHz of RF bandwidth with 8 bit samples
  • 25 MHz of RF bandwidth with 16 bit samples
  • Gigabit Ethernet connectivity
  • MIMO capable - requires two or more USRP N200 devices as motherboard has one daughterboard slot (1 RX + 1 TX connectors)
  • Onboard FPGA processing
  • FPGA: Xilinx® Spartan® 3A-DSP XC3SD1800A
  • ADCs: 14-bits 100 MS/s
  • DACs: 16-bits 400 MS/s
  • Ability to lock to external 5 or 10 MHz clock reference
  • TCXO Frequency Reference (~2.5ppm)
  • Optional internal GPS locked reference oscillator
  • FPGA code can be changed with Xilinx® ISE® WebPACK™ tools
  • Frequency range: DC - 6 GHz with suitable daughterboard
Product n200.jpg

N210

  • 50 MHz of RF bandwidth with 8 bit samples
  • 25 MHz of RF bandwidth with 16 bit samples
  • Gigabit Ethernet connectivity
  • MIMO capable - requires two or more USRP N210 devices as motherboard has one daughterboard slot (1 RX + 1 TX connectors)
  • Onboard FPGA processing
  • FPGA: Xilinx® Spartan® 3A-DSP XC3SD3400A
  • ADCs: 14-bits 100 MS/s
  • DACs: 16-bits 400 MS/s
  • Ability to lock to external 5 or 10 MHz clock reference
  • TCXO Frequency Reference (~2.5ppm)
  • Optional internal GPS locked reference oscillator
  • FPGA code can only be changed with the paid version of the Xilinx® ISE® Design Suite tools
  • Frequency range: DC - 6 GHz with suitable daughterboard
Product n210.jpg

Compatible Daughterboards

  • SBX-40
  • UBX-40
  • WBX-40
  • CBX-40
  • LFRX / LFTX
  • BasicRX / BasicTX
  • TVRX2
  • DBSRX2

RF Specifications

RF Performance (with WBX)

  • SSB/LO Suppression -35/50 dBc
  • Phase Noise 1.8 GHz 10kHz -80 dBc/Hz
  • Phase Noise 1.8 GHz 100kHz -100 dBc/Hz
  • Phase Noise 1.8 GHz 1MHz -137 dBc/Hz
  • Power Output 15 dBm
  • IIP3 (@ typ NF) 0 dBm
  • Typical Noise Figure 5 dB

Hardware Specifications

  • Ettus Research recommends to always use the latest stable version of UHD

N200

  • Current Hardware Revision: 4
  • Minimum version of UHD required: 3.8.0

N210

  • Current Hardware Revision: 4
  • Minimum version of UHD required: 3.8.0

Clocks and Samples Rates

  • FIXME NEEL

Physical Specifications

Dimensions

22 x 16 x 5 cm

Environmental Specifications

Operating Temperature Range

  • N200/N210 0-40 °C

Schematics

N200/N210

N200/N210 Schematics

Key Component Datasheets

Part Number Description Schematic ID (Page)
AD9777 Dual Channel, 16-Bit DAC U3 (1)
ADS62P4X Dual Channel, 14-Bit ADC U2 (1)
XC3SD3400AFG676 FPGA U1 (2,8,9,10,11,12)
AD9510 Clock Distribution IC U9 (4)
ET1011C2 Gigabit Ethernet Transceiver U12 (6)
CY7C1354C Pipelined SRAM U19 (7)
MAX232 Drivers/Receiver U25 (10)

Mechanical Information

Weight

1.2 kg

FPGA

  • Utilization statistics are subject to change between UHD releases, current as of UHD 3.9.4

N200

Device utilization summary:
---------------------------

Selected Device : 3sd1800afg676-5

 Number of Slices:                    18356  out of  16640   110% (*)
 Number of Slice Flip Flops:          20466  out of  33280    61%
 Number of 4 input LUTs:              32968  out of  33280    99%
    Number used as logic:             28511
    Number used as Shift registers:    3945
    Number used as RAMs:                512
 Number of IOs:                         338
 Number of bonded IOBs:                 331  out of    519    63%
    IOB Flip Flops:                     342
 Number of BRAMs:                        41  out of     84    48%
 Number of GCLKs:                         6  out of     24    25%
 Number of DCMs:                          1  out of      8    12%
 Number of DSP48s:                       31  out of     84    36%

N210

Device utilization summary:
---------------------------

Selected Device : 3sd3400afg676-5

 Number of Slices:                    18349  out of  23872    76%
 Number of Slice Flip Flops:          20475  out of  47744    42%
 Number of 4 input LUTs:              32986  out of  47744    69%
    Number used as logic:             28529
    Number used as Shift registers:    3945
    Number used as RAMs:                512
 Number of IOs:                         338
 Number of bonded IOBs:                 331  out of    469    70%
    IOB Flip Flops:                     342
 Number of BRAMs:                        41  out of    126    32%
 Number of GCLKs:                         6  out of     24    25%
 Number of DCMs:                          1  out of      8    12%
 Number of DSP48s:                       31  out of    126    24%

Interfaces and Connectivity

N200/N210

  • Gigabit Ethernet

Multiple Device Configuration

  • [ADD]

Certifications

RoHS

As of December 1st, 2010 all Ettus Research products are RoHS compliant unless otherwise noted. More information can be found at http://ettus.com/legal/rohs-information

Certificate of Volatility

N200/N210

Downloads (FPGA images, E310 images, etc.)

FPGA Resources

UHD Stable Binaries

UHD Source Code on Github


Application Notes