OAI Reference Architecture for 5G and 6G Research with USRP

From Ettus Knowledge Base
Revision as of 21:21, 4 November 2022 by NeelPandeya (Talk | contribs) (Created page with "==Author== Neel Pandeya, Bharat Agarwal ==Application Note Number== '''AN-956''' ==Abstract== This Application Note presents a reference design for using the Eurecom Open...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Author

Neel Pandeya, Bharat Agarwal


Application Note Number

AN-956


Abstract

This Application Note presents a reference design for using the Eurecom OpenAirInterface (OAI) software stack to implement 5G/NR Stand-Alone (SA) systems on the USRP N300, N310, N320, N321, X410 radio devices. The reference design covers the basestation (gNB), the user equipment (UE), and the Core Network (CN) components of the network. Three types of UE are used: a UE running on a USRP radio; a wireless modem module UE; and a commercial (COTS) handset/phone. The reference design supports operation in Frequency Range 1 (FR1), and support for operation in FR2 will be added at a future date. The various aspects of installing, configuring, and running the hardware and software components of the network are discussed in detail, along with a discussion of expected results, methods to benchmark and monitor the system, and troubleshooting steps.


Introduction

This is example text.

Retrieved from "https://kb.ettus.com/index.php?title=OAI_Reference_Architecture_for_5G_and_6G_Research_with_USRP&oldid=5508"